Welcome!

The following will guide you through the process from first flight, measuring, quotations, work preparation, design and invoicing. Handling your subscription as wel as payment details.

Menu

Summary

AiroCollect works as follows:

  1. You fly with a drone over the area you want to scan (5-10 min).
  2. You upload the pictures into collect.airobot.eu.
  3. After processing, you get an e-mail (30 min average) 
  4. Go and take all measurements/exports you need

Below you will find detailed instructions how to start, use the software including management of your subscription and payment.

The objective is to get you to maximise your profit with AiroCollect.

Demo

Roof

The roof demo explains the potential performance of AiroCollect to measure roofs to make offerings to your clients.

Solar

The solar demo explains the potential performance of AiroCollect to simulate solar project offerings to your clients.

Design

The quotation demo explains the potential performance of AiroCollect create project offerings at your clients.

Invoicing

The quotation demo explains the potential performance of AiroCollect create project offerings at your clients.

Introduction

AiroCollect is a cloud based application:

  1. The software is accessible everywhere there is internet
  2. We store all for you, no more save buttons
  3. You always have the latest version, no more updates

The only thing you need to do is setup your drone and go fly to take all measurements needed.

System setup

Get airborne

Fly

AiroCollect works with any drone that takes images with GPS position:

  1. You fly with your drone over the object you want to digitize.
  2. While flying over, you let the drone take images.
  3. Each image should have at least 70% of the previous image on it.
  4. Each image should have some of the environmental context on it.
  5. On average a scans vary between 50 and 250 images
  6. For large terrain scans the system can handle up to 1.500 images

Below you will find some explanation on how you need to fly and start assembling your model.

Operate a drone

Scan your object

Upload to Airocollect

Measure

AiroCollect has many measurement options:

2D tools

  • distance
  • surface
  • images
  • circles
  • notes
  • texture
  • compare

3D tools

  • distance
  • area
  • height
  • corners
  • notes
  • volumes
  • height profiles
  • reference points

Our software is very flexible about which drone you use and it is also exceptionally accurate. On average the scale is 99% accurate. Proven to be more than sufficient for quotations, work preparation and invoicing. 

If verified true accuracy is wanted, one can scale to an exact measurement taken or use a self defined reference plane. Use of an RTK corrected drone provides for the same. With one of those mitigations, data is additionally useful for accurate design and land registry.

Whether measuring volumes, surfaces, distances or elevation, Airocollect delivers measurements with precision down to the centimeter, allowing you to use geographic points easily and accurately.

Measurements can be taken in metric or imperial.

Classifications contain a self defined label and color to help in summation of measurements taken.

  • Roofers get an immediate overview of total surface area of tiles, scaffolding or total distance of ridges and gutters and much more.
  • Gardeners get the total surface area from for example grass or pavement, total volume of soil to displace or bushes to remove or total number of sprinklers to install,…
  • Generically you can use them to get periodic inventory on stock piles or all other different type of aggregated measurements.

In total 30 self defined classifications can be configured.

Use the software

Workspace
2D tools
Facade

Workspace

Functions to command the drone from the office.

Visualize your scanned projects

  1. Select the project by clicking on the arrow or typing in part of a project name.
  2. Select the item by clicking on the arrow or typing in part of an item name.
  3. Choose the scan you want to work in.
  1. Select the project and item you want to upload a project in.

    – If the project and item are non existent, click the + button.
    – Once the + button is clicked, validate with the v or cancel with x

    If you worked in the same area, upload under the same project and item! This will allow to compare models and have roof and facade measurements at the same location.

    Click NEXT to continue.

  2. Choose the type of scan you did for the optimal working of the algorithm.

    – With TERRAIN you will an orthophoto 2D (satellite image)
    – With TERRAIN you get a 3D pointcloud & mesh (photorealistic 3D)
    – With FACADE you will get a 3D pointcloud & mesh

    Now choose a name for the scan you are about to make and press next.

  3. Press add more files to open up a file finder or drag and drop the images taken by the drone into this window.

    – For fast operation, copy the images first from your drone to your pc.
    – Only select images from a single area and similar time.
    – Exclude images on the ground.
    – Only include images with air on them in “Façade” scans

    The software will check if images comply with some of the best practices to generate a usable model. For some rules the upload will block, for others you will get a warning that the result by vary.

    If an image does not comply, you should remove them from the list.

  4. The final step displays the coordinate system in which your images will be processed. This is important if you want to do a rectification step by adding ground control points or have images taken with RTK GPS position.
  1. Company
    – Add company logo for report.
    – Add company details for report.

  2. Users
    – Manage users, menu and data access.

  3. Projects
    – Edit name and project details.

  4. Datasets
    – Overview and delete option for scans.

  5. WMS
    – Add and edit multiple potential different backgrounds for 2D.
    – Ex. Land Registry, elevation models, demographic data.

  6. Coordinate system
    – Define default coordinate systems for GPS and RTK-GPS flights
    – Define default coordinate system for exports
    – Metric & Imperial switch

  7. Classifications
    – Edit the color aggregates by which measurements are categorized.

  8. Licenses
    – See in which program you are and how many scans you have left.

  9. Drones
    – See which drones you cannot to the AiroLive functionality.

Link towards this page.

  • Language
  • Dark Mode
  • Change Password
  • Log Out
  • Notifications
  • Tablet/Desktop Mode

2D Environment

(works also during measuring)

Translate (move up, down, left right)
1. Click & Hold left mouse button
2. Drag the mouse pointer over the screen
3. Release to keep current position

Rotate (yaw the image to a new horizontal position)
1. Keyboard press SHIFT and hold
2. Click + Hold left mouse button
3. Drag the mouse pointer over the screen to rotate
4. Release to keep current position

Zoom (enlarge or minify what you see)
1. Use mouse scroll up to zoom in
2. Use mouse scroll down to zoom out

There are multiple tools you can use in order to get useful information from the ortho photo. These are explained later:

  • Measurement Tools: Take measurements
  • Anotations: Show measurements taken
  • Generate a PDF report
  • Import a CAD file
  • Export CAD file, ortho photo (with coordinates), DEM

Home Point (go back to initial position)
1. Click the house icon

Layers (visualize different backgrounds)
1. Publicly hosted WMS layers
2. Privately hosted WMS layers
3. Black background
4. White background

North Arrow (for solar)
1. Click to point North Up

Dataset Selection

2D Environment
– View Ortho, Satellite image

3D Environment
– View the model in 3D

Images
– Review all uploaded images

Settings
– Here you can find the references of the scan
– Here you can find the links to the model to be shared online.

a) Project Name
b) Item Name

Select and visualize the different scans made under this project and item.

It is possible to compare different ortho photo’s with each other.

You select how you want to use the comparison system:
– Compare 2 datasets with eachother
– Compare a dataset with a WMS layer (Ex. Land Registry)

This is ideal to do project follow up or land registry comparison.

2D Measurements


Reset
Click left and validate to start over

Undo
Click left to reset last measurement taken

Edit
Put the screen in edit mode whereby you can go in the ortho photo and modify placed measurements

Delete
Activate a delete mode, clicking left on a measurement will delete it.

Choose a classification

1. Click left and select a label and color for the measurement you are going to take.

Names and colors can be edited under the “admin” section
Measurements taken under a classification will be grouped for edit and reporting aftwerwards.

Activate a measurement tool

1. Select the tool you want to use.
 – Click left once to use the tool once
 – Click left twice to use the tool continuously

Move over the ortho photo to start the measurement.

1. Based upon the classification chosen you have a colored dot connected to the mouse pointer.
2. Click left once to start a measurement.
3. Click left again for an intermediary point, if needed.
4. Click left twice to finish the measurement.

Your measurements can be found back under annotations below the classification chosen.


Add a reference measurement to the model

1. Click left to activate reference measurement placing.
2. Place a reference measurement on the ortho photo, 1 Click left to start, 2 Clicks left to end
3. Change the value to the desired value
4. All other measurements well be rectified with the reference measurement taken. 

 

2D Annotations

Click on show / hide all, to quickly toggle between visualizing all annotations or none.


Show classification details

1. Click left on the arrow next to a classification title to open it.

Visualization of classification

1. Click left on the eye to see the classification visualization options:
 – Dark Blue: Show All
 – m2: Show lines and surfaces
 – m: Show lines and distances
 – Light Blue: Show lines only
 – Black: Hide

Classification Label

1. Click left to show/hide the classification label on the ortho photo.

Measurement Label

1. Click left to show/hide the measurment label on the ortho photo.

Garbage Can

1. Click left and validate deletion of all measurements of 1 classification.


Edit the name

1. Click left on the pencil to edit

Change the view

1. Click left on the eye to change the way the measurement is visualized. Same as with the classification layer.

Change the classification

1. Click left on the colored dot to change the measurement classification.

Delete the measurement

1. Click left on the garbage can and validate to remove the measurement.

2D Reporting Tool


Tt
1. Click left to open a popup to add a generic text to each screenshot taken.

Camera

1. Click left on camera+ to get a dotted rectangle.
2. Move the image within the rectangle to get the right view.
3. Click left the second time to take the screenshot.
4. Press the cross right to cancel.

Generate Report

1. Click left on generate report to generate the report.


Download PDF

1. Click left on the download pdf button to get the report.

Download CSV

1. Click left on the download csv button to get the measurements in sheet form

Garbage Can

1. Click left on a garbage can to delete the image in view.


Screenshots

Press the arrows, in case of multiple screenshots to show the screenshot taken.
View a thumbnail of the screenshot.


1. The dotted line describes what will be placed as an image on the report.
2. With the dotted line active you can still zoom and rotate the ortho photo.
3. The goal is to get the best view of what you want to display to your client into this rectangle.

2D Imports & Exports


Upload a 2D georeferenced CAD file as an overlay of your ortho photo


1. The ortho photo in TIFF format including geo reference files.

2. The DEM (digital elevation model)

3. The ortho photo in JPG format including geo reference files.

4. The drawn measurements as lines into a DXF format.

3D Environment

(works also during measuring)​

Translate (move up, down, left right)
1. Click followed by Click & Hold left mouse button
2. Drag the mouse pointer over the screen
3. Release to keep current position

Rotate (yaw the image to a new horizontal position)
1. Click & Hold left mouse button
2. Drag the mouse pointer over the screen to rotate
3. Release to keep current position

Zoom (enlarge or minify what you see)
1. Use mouse scroll up to zoom in
2. Use mouse scroll down to zoom out


There are multiple tools you can use in order to get useful information from the ortho photo. These are explained later:

  • Measurement Tools: Take measurements
  • Anotations: Show measurements taken
  • Reporting Tool: Generate a PDF report
  • Volumes: Do volume measurement
  • Solar Panel Tools: Simulate solar panels.
  • Clippings: Create point cloud cut-outs for export and visualisation
  • Height Profiles: Generate height profile
  • Imports: Import CAD Design
  • Exports: DAE, LAS, OBJ, e57, DXF


Home Point (go back to initial position)
1. Click the house icon


Dataset Selection

2D Environment
– View Ortho, Satellite image

3D Environment
– View the model in 3D

Images
– Review all uploaded images

Settings
– Here you can find the references of the scan
– Here you can find the links to the model to be shared online.

a) Project Name
b) Item Name


Select and visualize the different scans made under this project and item.


Go from a point cloud to a photorealistic image

3D Measurements


Reset
Click left and validate to start over

Undo
Click left to reset last measurement taken

Delete
Activate a delete mode, clicking left on a measurement will delete it.

Choose a classification

1. Click left and select a label and color for the measurement you are going to take.

Names and colors can be edited under the “admin” section
Measurements taken under a classification will be grouped for edit and reporting aftwerwards.

Activate a measurement tool

1. Select the tool you want to use.
 – Click left once to use the tool once
 – Click left twice to use the tool continuously

Move over the ortho photo to start the measurement.

1. Based upon the classification chosen you have a colored dot connected to the mouse pointer.
2. Click left once to start a measurement.
3. Click left again for an intermediary point, if needed.
4. Click left twice to finish the measurement.

Your measurements can be found back under annotations below the classification chosen.


Add a reference point

1. Click left to activate reference point placing.
2. Click left to place a reference point in the 3D model.
3. All height points will be offset towards this reference point.
4. Height profiles are offset to this reference point.

Add a reference plane

1. Click left to activate reference plane placing.
2. Place 3 points on the 3D model, Click left to place a point.
3. Place points far apart and not in a line to have the best defined plane.
4. All height measurements well be taken orthogonal from the plane. 

Add a reference measurement

1. Click left to activate reference measurement placing.
2. Place a reference measurement on the 3D model, 1 Click left to start, 2 Clicks left to end
3. Change the value to the desired value
4. All other measurements well be rectified with the reference measurement taken. 

3D Annotations


Click on show / hide all, to quickly toggle between visualizing all annotations or none.


Show classification details

1. Click left on the arrow next to a classification title to open it.

Visualization of classification

1. Click left on the eye to see the classification visualization options:
 – Dark Blue: Show All
 – m2: Show lines and surfaces
 – m: Show lines and distances
 – Light Blue: Show lines only
 – Black: Hide

Classification Label

1. Click left to show/hide the classification label on the 3D model.

Measurement Label

1. Click left to show/hide the measurment label on the 3D model.

Garbage Can

1. Click left and validate deletion of all measurements of 1 classification.


Edit the name

1. Click left on the pencil to edit

Change the view

1. Click left on the eye to change the way the measurement is visualized. Same as with the classification layer.

Change the classification

1. Click left on the colored dot to change the measurement classification.

Delete the measurement

1. Click left on the garbage can and validate to remove the measurement.

3D Reporting Tool


1. Tt –> Click left to open a popup to add a generic text to each screenshot taken.

2. Camera:

– Click left on camera+ to get a dotted rectangle.
– Move the image within the rectangle to get the right view.
– Click left the second time to take the screenshot.
– Press the cross right to cancel.

3. Generate Report

– Click left on generate report to generate the report.


Download PDF

1. Click left on the download pdf button to get the report.

Download CSV

1. Click left on the download csv button to get the measurements in sheet form

Garbage Can

1. Click left on a garbage can to delete the image in view.


Screenshots

Press the arrows, in case of multiple screenshots to show the screenshot taken.
View a thumbnail of the screenshot.


1. The dotted line describes what will be placed as an image on the report.
2. With the dotted line active you can still zoom and rotate the ortho photo.
3. The goal is to get the best view of what you want to display to your client into this rectangle.

3D Volumes


The volume tool can be used to measure heaps and wells.
Get the positive and negative volume, measured vertically above and below the surface :

  – The surface can be defined from choosing out of the 5 options available.
  – Once a contouring polygon has been defined it is projected vertically on this surface.
  – The volume is the total volume from the surface to the first point found above or below.
  – This vertically within the projected polygon boundary.


1. Click left on a volume icon to activate the option.
2. Go in the model and set out a polygon around the volume to measure.
3. In the model click left once to start the polygon and for each point.
4. Click left twice to finish the polygon.
5. Based upon the option chosen, a reference point or plane placement is next.

Average Point

The surface is the best approaching plane defined by the polygon placed.
Once the polygon is placed, the volume is calculated automatically.

Minimum Point

The surface is the horizontal plane through the lowest point of the polygon drawn.
Once the polygon is placed, the volume is calculated automatically from this lowest point reference.

Maximum Point

The surface is the horizontal plane through the highest point of the polygon drawn.
Once the polygon is placed, the volume is calculated automatically from this highest point reference.

Reference Point

The surface is the horizontal plane through a reference point manually placed on the model.
Once the polygon is placed, the volume is calculated after you have placed the reference point.

Reference Plane

The surface is the plane defined by you through placement of 3 reference points on the model.
Once the polygon is placed, the volume is calculated after you have placed the 3 points that define the reference plane.


Show classification details

Click left on the arrow next to a classification title to open it.

Download volume point cloud

Click left on the download arrow in a volume to download it.

Visualization of the classification or measurement

Click left on the eye to see the classification visualization options:
 – Dark Blue: Show All
 – Light Blue: Show lines only
 – Black: Hide

Change the measurement name

Click left on the pencil left of the measurement name

Classification or measurement Label

Click left to show/hide the classification label on the 3D model.

Garbage Can

Click left and validate deletion of all measurements of 1 classification.

3D Clippings


1. Click left on the square icon to activate the clipping tool.
2. Move over the model to place the clipping box.
3. Click left to place the clipping box on the model.
4. Click left in the box to edit the box.


1. Select inside to only show what is inside the clipping.
2. Select outside to hide the clipping contents from the model.
3. Select none, to show the clipping as a different colored point cloud.


Pencil

Click left on the pencil to change the clipping name.

Eye

Click left on the eye to change the clipping visualisation.

Download arrow

Click left to download the clipping as a point cloud.

Garbage can

Click left and confirm to delete te clipping.

 

 

 


Rotate

Click left and hold on a curved line. Swipe to rotate the box along that curved line.

Translate

Click left and hold on a straight line. Swipe to slide the box along that line.

Expand

Click left and hold on a bullet. Swipe to expand the box along that bullet line.

3D Height Profiles


1. Click left on the square icon to activate the clipping tool.
2. Move over the model to place the clipping box.
3. Click left to place the clipping box on the model.
4. Click left in the box to edit the box.


1. Select inside to only show what is inside the clipping.
2. Select outside to hide the clipping contents from the model.
3. Select none, to show the clipping as a different colored point cloud.


Pencil

Click left on the pencil to change the clipping name.

Eye

Click left on the eye to change the clipping visualisation.

Download arrow

Click left to download the clipping as a point cloud.

Garbage can

Click left and confirm to delete te clipping.

 

 

 


Rotate

Click left and hold on a curved line. Swipe to rotate the box along that curved line.

Translate

Click left and hold on a straight line. Swipe to slide the box along that line.

Expand

Click left and hold on a bullet. Swipe to expand the box along that bullet line.

3D Imports & Exports

Upload a 3D georeferenced CAD file as an overlay of your point cloud model.

1. The 3D Model in DAE format for SketchUp.
2. The point cloud in LAS including geo reference.
3. The 3D model as points in OBJ.
4. The point cloud in e57.
5. The CAD 3D DXF of the measurements taken.
  – This option only works if measurements are placed.

Solar

AiroCollect has following simulation options:

Solar Roof Simulation


The solar tool can be used to quickly get an estimate about how many and where solar panels can be placed on a roof:

  – With the measurement tools you can visualize areas of non-placement of panels
  – With the solar tool you can select texture and size of a panel.
  – Once the first panel is placed correctly you can easily duplicate to fill the roof.
  – If there are areas with issues you can easily remove panels.
  – Once simulated, you can send to your client a visual on how it will look.

Place a panel


1. Adjust the Length and Width of the panels to be placed
2. Select the texture of panel to be placed
3. Go to the 3D model and hover with the panel on a side of the roof
4. Click left once you feel that the panels center is where it should and the panel is parallel to the roof. 

Click left on “Reset and clear all”, validate and start over.


Edit panel name

Click left on the pencil next to the name to change it.

Duplicate panels

Click left on the arrows to duplicate panels in multiple directions.
Duplications works best if the panel is green arrow up, red left, blue from the surface away.

Garbage can

Click left on the garbage can and validate deletion.


The first panel to be placed is the most important one.

Once you have a texture selected you will see while hovering over the 3D model a panel tries to place itself on the model. The idea now is to place the first panel where the first row can start.

Click left to anchor the center point of the first panel where it needs to be.

Orientate the 1st panel

Once the first panel has been placed:

1. Click left on the panel to activate the panel manipulation tools.

2. Use the curved lines to rotate the panel correctly.
  – Click left hold and slide on a curved line to make the rotation happening.

3. Use the straight lines to shift the panel correctly.
  – Click left hold and slide along the line to make the panel move.

Make sure the panel is aligned on the surface and orientated with green arrow up, the red to the right and the blue coming towards you from the surface.

Duplicate panels

1. Click left on the arrows to duplicate panels in multiple directions.
Duplications works best if the panel is green arrow up, red left, blue from the surface away.

Fill a roof


1. Hover over the solar panel items and see the panel light up on the 3D model.
2. Delete those that are placed over obstacles.


1. Show your clients how their roof will transform.
2. Figure out if there are obstacles present that influence the yield of the panels.

Design

Import into CAD

sketchup
Sketch Up

Import in Sketch up 2022

vectorworks
Vectorworks

From minute 27

autocad
lumion

Admin

Within AiroCollect you have the opportunity to configure the way the application works.

Overview


Company

Modify company name, V.A.T. number, logo and address.
Those will be used on the report of each scan.

Users

Add, modify and delete users.

Give users program access:
 – View: see projects
 – View-Edit: see and modify projects
 – Upload: Create new projects
 – Admin: manage the admin page and have full access.

Give users data access:
 – All or a set of projects
 – All or a set of items
 – All or a set of datasets

Projects

 – Manage name, description and location data.
 – Delete if necessary.

Datasets

 – List of all datasets with option to delete.

Web Map Service (WMS)

 – Add self-hosted or online hosted WMS services to the ortho photo (2D) overview.
 – Be able to compare your model with items of the real world.

Coordinate System

 Define the coordinate systems in which real world data should be handled.
 – Set the standard for non-RTK and RTK coordinates on drone images
 – Set the standard for all geodata exports.

Modify the measure world between METRIC and IMPERIAL.

Classifications

Define the labels of the colors used during measurement.
Adjust them to what fits your business.

Licenses

Get an overview of your AiroCollect license.

Drones

Get insight in the connected drones to be used with AiroCollect live.


Modify the items chosen from the menu.

 

License

The AiroCollect license is a single license.

You are either in a limited system (SMALL, MEDIUM) or in an unlimited system (UNLIMITED). You pay this license either on a monthly or annual basis.

Based upon the formula that best suits you, you can always change between licenses.

Modify

A) To modify your subscription surf to subscriptions.

1. Login into your account.
2. Click on subscriptions to view what you have running with us.
3. Click on the subscription you want to change.
4. Press “Upgrade or Downgrade” to change your license.

B) Following modifications are possible:

Based upon the option chosen, your license will be adapted automatically to a new subscription.

Top Up

A) To top up your subscription surf to subscriptions.

1. Login into your account.
2. Click on subscriptions to view what you have running with us.
3. Click on the subscription you want to change.
4. Press “Upgrade or Downgrade” to change your license.

B) Following modifications are possible:

Based upon the option chosen, your license will be adapted automatically to a new subscription.

Payment

Payment can be done directly on orders or managed in general.

A) Order payment, surf to orders (click on the link).

  1. Login into your account
  2. Click on “Orders” to see your order history
  3. Click on “Pay” to fulfill the order

B) Payment method add or change, go to payment-methods (click on the link).

  1. Login into your account
  2. Click on “Payment methods” to see your settings
  3. Click on “Add payment method” to manage

Invoice

To retrieve your invoice surf to orders.

  1. Login into your account
  2. Click on “Orders” to see your order history
  3. Click on invoice from the order you want to get your invoice

Download

Click the icon above to directly install or link to the application.

The applications are made to make scanning an area with a drone easy!
They are all free of charge.

Compatible Drones
(other DJI drones can work too but are not supported)
  • MINI-1 + MINI-1 SE
  • MINI-2 (not MINI-2 SE ; not MINI-4K)
  • MINI-3 + MINI-3 PRO
  • MINI-4 + MINI-4 PRO
Android Devices
(other android devices can work too but are not supported)
  • Android 10-11-12-13-14
  • Device support: Samsung S7, Samsung S8, Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Pixel, Google Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei Mate 8, Nubia Z7 mini, SONY Xperia Z3, MI 3, MI PAD, Motorola G24

Tips & Tricks

Here we provide feedback on how to optimize your process. Depending on what you want to retrieve from a scan the quality of result sometimes resides in the details of operation.

Below you can find some questions we have received:

Airocollect Cloud Application

The reason facades are sometimes not visible is due to the lack of images taken.

When adding your images into AiroCollect, best practices are:

  1. Have a stable internet connection.
  2. Upload the images from the harddisk from your computer not from the drone.
  3. Do not close the upload window of your browser screen.
  4. Do not let the computer go into sleep mode.

If one of the above is not present, please try again correcting the above.


Skewed surfaces

If you need to measure skewed surfaces be sure you are working in the 3D environment. The 2D environment is only useful for measuring perfectly horizontal planes.

The scan did not follow a standard method of flying

  – only a few images
  – different gimbal angles during the scan
  – images taken at different heights
  – flights at different times during the day

It is recommendable to use the “Scale Bar” to set a known reference measurement.

Airocollect Android App
  1. Is the drone and remote control ON?
  2. Have you removed another app like DJI that could also connect to the drone from memory?
  3. Have you installed the right app for your drone?
  4. Is your phone compatible with the android application?


1. Does the drone have a GPS position?

  1. Does your drone have GPS position?
  2. Is the battery of your drone and remote sufficiently charged?
  3. Does your drone require some sort of calibration (compas, IMU)?
  4. Has your drone the latest firmware installed?
Instagram Facebook Youtube Linkedin

NAVIGATE

AIROCOLLECT

Legal

  • ©2024 AiroCollect
Scroll to Top

Thank you for starting a trial !

Our servers spun into action to create an environment especially for you.

Go to you inbox and open the email from us with the app user and your login.

If you have not received an email please leave a message at: contact@airobot.eu. In need for further assistance contact us.

Our goal now is to get you feel the benefit as quickly as possible!

a) There is a demo dataset in your application.
b) Visit the in application help for assistance.

Enjoy!

Login

To go directly to the login page, press the button above!

AIROCOLLECT TRIAL

Please fill in the information with * below.
You will get an e-mail with instant access to a trial.
In case you have a drone, upload your own project images.

Average number of projects monthly ?

AIROCOLLECT ENTERPRISE

Please fill in the information with * below
We will contact you as soon as possible

Demo Roof & Solar

You will get e-mails and instant access to a trial period.
In case you have a drone, test it on your own projects.

AIROCOLLECT DEMO

Please fill in the information with * below
Press demo video to have direct access

Average number of projects monthly ?